Bootstrap Framework 3.3.6

hola compañeros ;alguna compi, tendria las medidas de un motor ,os .55,y me las podia proporcional, para ver si en un avion que he fabricado, lo pudiese intalar, muchas gracias por la informacion, y un cordial saludo joako

Hola:

Ahi va lo que dice la pagina web

SPECS: Displacement: 0.545 cu in (8.93cc)
Bore: .906 in (23mm)
Stroke: 0.846" (21.5mm)
Practical RPM: 2,000-17,000
Power Output: 1.75 ps/16,000 RPM
Weight: 14.25oz (404g)
Recommended Props: 12x7-8, 13x6-7
Crankshaft thread size:1/4-28
Distance/remote needle to end of crankshaft: 4.7" (119.4mm)
Distance from center of engine to drive hub: 2.4" (60.4mm)
Distance from center of engine to end of crankshaft: 3.4" (87.6mm)
Distance/crankshaft center to muffler exhaust outlet: 3.9" (100.5mm)
Height from crankcase bottom to top of cylinder head: 3.3" (85.2mm)
Height/crankshaft center to top of cylinder head: 2.6" (67.4mm)
Width including mounting tabs: 2" (51mm)
Width not including mounting tabs: 1.4" (35mm)
Width between mounting holes same side: 0.69" (17.5mm)
Width between mounting holes opposite side: 1.7" (44mm)"
Diameter of muffler body: 1.5" (38.1mm)
Angle of muffler in relation to engine: 4°

Saludos

Dario